The aim of applying waterproofing for hiking boots is to allow air to still pass through the shoe. The waterproof layer won’t work if there is no breathability in the shoe and the interior becomes wet through condensation. Leather has the benefit of being naturally breathable but synthetic shoes must be designed this way. How to Waterproof Hiking Boots?

The company also notes the spray can darken some lighter-colored gear, so spot-testing is recommended. It can also reduce the flame-retardant properties of some fabrics.

Apply a small amount of dubbin wax to a cloth and rub over the leather sparingly. If the wax is too hard to rub onto your boots, use a hair dryer to soften it. Use a tiny amount of conditioner either on your fingers or on a clean cloth and work it into the boot in massage-like movements. You should aim for a thin, even coating including the seams and welts. We got only one recommendation from the GORE-TEX team: they see some advantages in using a waterproof treatment spray. While you actually need to soak the piece of clothing in some dry treatments, you can easily apply a spray to the outer layer. This way, you need a smaller amount of the treatment and the inner fabric does not receive an unnecessary amount of it. Leather care for GORE-TEX shoes Lastly, we considered the cost and environmental issues like aerosol and PFCs. We wanted to ensure we tested and considered sprays in a range of costs and included sprays that are easy on the planet and people using the product. This will depend on how much hiking you do each year. Some hikers top up their waterproof layer at the end of the season ready for the following year. Other hikers actively maintain their boots after each trek to keep their footwear at maximum water repellence. It will depend on the brand of shoe and how much hiking you are doing.

When it comes to the upper material, GORE-TEX always refers to the care instructions of the manufacturers. They always include instructions on how to treat the material to give it the longest possible life span. Of course leather needs a different kind of maintenance than textile fabric. The fact that there is a GORE-TEX membrane two layers below the upper doesn’t have any impacts on this. But in any case, you can’t go wrong with removing the dirt from the outside layer of the shoes, using a piece of cloth or a brush and some lukewarm water. If you plan to recondition the dry treatment of the shoes, this is one of the absolutely necessary steps. Not only will the heat gun absorb the waterproofing product into the leather, but any remaining shoe polish on the boots as well. Whether you apply to wet or dry boots, once the proofer has been applied, leave to air dry completely before wearing. Does waterproof shoe spray work? You’ll get the answer if you apply the Apple Brand Garde Rain & Stain Water Repellent on your boots. Just a little bit of spray, your boots are now safe from rain and stain. The invisible protective layer keeps your boots free from water, oil, grease, coffee, and harmful chemicals. It’s not wrong if we think it’s the best waterproof boot spray.

WATERPROOF SPRAY FOR LEATHER SHOES

Speciality waterproofer designed to add durable water repellency and restore the finish of waxed cotton garments. Easy to apply by hand, non flammable, PFC and aerosol free View Product Fabric & Leather and Footwear Cleaning Gel

There’s no doubt that the best product for waterproofing leather boots is the best way to prolong the durability of your boots. After all, these products don’t only prolong the durability of your boots. They also help to improve the appearance whilst enhancing their protection when you are out in the wet outdoors. Still, if you prefer an easy way to get the job done, then go right ahead and use your spray compound. Meltonian developed a compound that is safe to use on suede and leather because the compound dries in about 30 minutes after application. Therefore, in just a few minutes afterwards, you can start wearing your boots outdoors again. Why Water And Salt Can Damage Your Boots Keep your feet dry with the Cadillac Select Premium Water Repellent. This spray creates an invisible layer of protection and a barrier that ensures water cannot pass through. This protective spray helps to keep your feet dry all day. It also defends your boots from dirt, oil, and other stains. We love the fact that this waterproofing spray is made to be environmentally friendly. You don’t need to worry anymore about the harmful chemicals on your boots. Speciality cleaner designed to revitalise water repellency and breathability of leather items. Easy to apply by hand, non flammable and aerosol free. View Product Leather Restorer Even though the name suggests it: DWR treatment does not stay waterproof forever. Wearing your shoes on a regular basis, natural degradation, dirt and detergents reduce the efficiency of the dry treatment. GORE-TEX shoes are still waterproof but the upper materials will absorb more and more water.The only kit for thoroughly cleaning, re-waterproofing, and revitalising the breathability of wet weather clothing and footwear. Easy to use in your washing machine and by hand, non-flammable and PFC free. Includes a handy 10L roll-top waterproof dry bag and Nikwax Footwear Brush . View Product PolarProof ® Granger’s Performance Repel Plus is another good choice. The spray can be applied to most fabrics and works well on nearly all outdoor clothing. It too maintains breathability whilst keeping the boots waterproof. However, it wears off faster than Nikwax and should be applied more regularly. You have to avoid low-quality boot spray that’s made of toxic materials. Not only will it damage your boots, but it’s also bad for the environment. The Vetro Power Shoe Protection Spray is the best waterproof boot spray that’s guaranteed to be non-toxic and environmentally friendly. This boot spray is made of non-flammable, anti-UV, and anti-fade properties to increase the lifespan of your boots.